How it Works
Using technology innovated for the aviation industry, Aquapel Glass Treatment forms a chemical bond with the glass which increases water repellency, causing water to bead and easily shed off the glass. These fluorinated compounds apply in just minutes to a clean, dry windshield or any exterior glass surface, and lasts up to 6 times longer than silicone-based products.
Additionally, Aquapel Glass Treatment remains highly effective after months of normal use, including heavy rain and snow, car washing, glass cleaning and salt spray.
How to use Aquapel
Aquapel® Glass Treatment was developed by PPG Industries, leaders in glass technology. When
applied to a vehicle windshield, this innovative product improves vision in the rain, day and night.
Aquapel forms a chemical bond with glass, unlike other products that simply coat glass. As a result,
Aquapel can last up to 6 times longer than other products. One application can last for months!
Directions:
Step 1: Clean |
Thoroughly clean and dry the glass. |
Step 2: Apply |
Hold the applicator between the thumb and fingers with the pad
down and level over the windshield. Squeeze the wings together until a popping
sound is heard and liquid is released onto the pad. Use immediately.
Wipe the soft pad of the applicator over the glass up and down then side to side
to ensure the glass is well covered. Avoid painted surfaces. Remove liquid from
non-glass surfaces with dry paper towel. |
Step 3: Dry |
Wipe the glass with a clean dry paper towel immediately after Aquapel
has been applied to the entire windshield. Dispose of applicator and paper towel.
Failure to wipe immediately may cause hazing that requires additional buffing
with a clean dry paper towel. |
Note: |
One single-use applicator will treat one windshield or two side windows.
- Do not let Aquapel air dry onto windshield.
- When applying to large surface areas treat and dry one half at a time.
- Application conditions: Do not use in temperatures colder than 50º F or hotter
than 90º F or in excessively humid conditions.
- Once applied, Aquapel® Glass Treatment can be reapplied as needed.
- Cleaning glass with ordinary glass cleaners will not affect product durability.
|
AQUAPEL(R)® is a registered trademark
of PGW Auto Glass, LLC.
Contents: Petroleum Distillates (CAS No.
64742-47-8), Proprietary
Ingredients.
|
DANGER: COMBUSTIBLE. HARMFUL OR FATAL
IF SWALLOWED. EYE AND SKIN IRRITANT.
HARMFUL IF INHALED.
Keep away from heat, sparks, flames and other ignition sources. Do not smoke. USE ONLY WITH ADEQUATE VENTILATION. Intentional misuse by concentrating and inhaling the contents can be harmful or fatal. Avoid eye and skin contact. FIRST AID: For eye or skin contact, wash thoroughly with water. In case of ingestion,
eye/skin irritation or if breathing is difficult, contact physician immediately.
KEEP OUT OF REACH OF CHILDREN. Emergency Medical/Spill Information in US: 760-476-3962; Access code: 333225. |
|
